David Brown 3800 help!  Looking for carburator and fuel pump.  Recently acquired this tractor and fuel is flowing heavily through the carb causing heavy flooding.  This is a Gas engine and quite rare I found out.  Have checked all local dealers and told "can't get parts".  Can you help?  mikewebb@hay.net (mikewebb)

I have a Power King tractor, about 1977-80 model, that I need parts for.  Would be interested in a parts tractor or even a running tractor.  Charles Rakes, PO Box 445, Bentonville AR 72712.  Phone (501) 273-5340 or E-Mail me at: cdrakes@ipa.net

I am looking for any information I can find on Mott hammerknife tractors (does such a thing exist?).  My e-mail address is: dmay@calibersys.com.  Thanks!

1960 Porche Farm Tractor, 3 cyl. disel. good condition, Price $2,000 (US) - James Mac Neil, 15 Edgewater Dr, Sydney, NS, Canada.  Phone (902) 562-1508 or E-Mail me at: canuckguy@hotmail.com

I am looking for parts for a Leland Tractor.  Do you know where I can get them? Laszlo Vajtay, Ski Plattekill Mountain Resort, PO Box 187, Plattekill Mountain Road, Roxbury NY 12474.  Phone (607) 326-3500, Fax (607) 326-3034 or E-Mail to:: plattkil@catskill.net web site: http://plattekill.com

I do not have I-net access. I'm using the address, etc.,  from Engine Weld and Machine Co. (The phone number is mine)...and I need parts for a 30D David Brown.... especially Main Bearings.  Please contact me Stan Englert) or Becky at Engine Weld and machine Co. Inc., 2600 Shoshone St, Idaho Falls ID 83401-1757.  Phone (208) 522-1296 or E-Mail to: engweld@srv.net - The home page is: http://www.engineweld.netib.com

I need some parts for my Gibson tractor.  The tractor is a 1948.  It is a Wisconsin air cooled motor model AEH, size 3 x 31/4. s/n 1070877,  Spec.  No. 45740.  The parts I need are Part # 77, Pinion Bearing, (Front Ball) quantity 1.   Part # 79, Pinion Snap Ring, (Front Pinion Brg.), quantity 1.   Part # 78, Pinion Bearing Snap Ring (Collar), quantity 2.  Any information please contact me at:  MJ@the-spa.com

1940's BF Avery Model V tractor. Advertising for my Uncle without computer. Engine is 4 cyl gas Hercules with 8V distributor ignition and starter. Runs but needs piston work. Gearcase front mount cracked. Has rear flat belt PTO. Sheet metal rusty. Rims OK but tires bad. Has wide front. Tractor located in Southern Maryland (St. Mary's County). Make offer.  E-Mail Mike Hammett at: mehammett@erols.com

I have a Gibson tractor.  It is around a 1948.  It starts up but I need a part for it .  I can't seem to find anybody that deals in this brand.  Does anyone know of a company that might deal in this antique brand, so I could order a part.  Contact Wizal @the-spa.com

Parting Out: 530 backhoe... Hoe attachment, $1800.00;  Loader & pump, $1200.00; Tractor, $900.00 or $500.00 without tires & wheels.  Paul Rauch, 1941 Riggs Road, Newark OH 43055.  Phone (740) 366-5477 or E-Mail me at: hurart@infinet.com

Clarkair Model BABX La Plant Choate Bulldozer fits on CA-1 Crawler, Nashville TN. Area.   E-mail me and I will send you some pics if interested.  Engine starts and runs (only 145 total manufactured... rare find) - Darryl Skelton at: DOS1010@AOL.com

1948 Gibson Model D Tractor.  Willing to sell for best offer. Tractor is good condition (garage kept) and has a front blade. Engine is in pieces (some missing). Located in PA.  E-Mail to Martin Barrett at: mkwbarrett@aol.com

410 D with Loader and Backhoe.  Dave Rich, PO Box 502, Columbus NE 68601.  Phone (402) 563-5477, Fax (402) 564-6833, or E-Mail me at: ddrich@megavision.com

8-16 Avery.  Bruce Hauck, 3379 Macedonia Rd, Bethel OH 45106.  Please call (513) 734-3357,  write, or e-mail to: cody1015@aol.com

1928 Rock Island  "F".  $4000.  Phone (519)542-5042

Holder 9700 tractor diesel, DEUZT 4 cylinder engine, with snowblade/sweeper, NICE CAB, will pay $14,000 pay monthly.  Britts Paving Plus, Newport NH 03773.  Phone (603) 863-7149 or E-Mail to: jdbritt@sugar-river.net

I am seeking any information or parts source for a Bungartz & Co. tractor.   This was built in Germany in 1963 according to the data plate.  Thanks in advance.   retserof@webzone.net

A loader for a Jet Star 3 Super.  E-Mail Bill Nagy at: nagyba@hotmail.com

2 x tyres to suit Stihl 1958 deisel tractor.  Tthe only markings on the tryes I have is (brand) Vergolst (size) 7-30 as the tractor was made in Germany but I would be gratefull of any info as to what size tyre would fit.  E-Mail to Craig Ryan at: ryan@tudogs.net.au

Various David Bradley implements And extra air-cooled engines.  I am looking for implements for a T70B Panzer tractor. I also have a standard monarch tractor in nearly complete condition needing restoration.  Call Clinton Koontz at (717) 345-4029.

Army Trucks-6x6, diesel engines, Excellent farm vehicles.  Dave Newman, PO Box 582, Buckingham PA 18912.  Call (215) 794-0671 or E-Mail to: Daltry2@webtv.net

1964 ED 40 in good shape was used as a working tractor until recently as I sold my place.    $4000  obo.   Jim Ulsh, 608 Hewitt, Pueblo CO 81005.  Phone (719) 561-1773.

Rear rims and hubs for YANMAR model YM135 .  Write Gayle York, 315 N Main, Caldwell KS 67022.  Phone (316) 845-6557 or E-Mail me at: skygey@yahoo.com

Parts or chassis for 1932 Toro "General" Golf Course Tractor, especially dump box and gas tank. Any condition. Peter Fausch, Dayton MN.  Phone (612) 475-0010 or E-Mail me at: pfausch@srfconsulting.com

 I am looking for any info. on a SHAW DU-ALL any pictures would help also.  Daryl Hammond, Powers Rd, Constable NY 12926.  Phone (518) 481-6409 or E-Mail to: darylh@slic.com

Last fall I was corresponding with a fellow from Iowa about me picking up a David Bradley from him---then I had some health issues and lost my information.  If you read this, please contact!!  Am also interested in David Bradley garden tractors & implements from other sources. E-Mail Gene Waugh at: kgwaugh@relaymail.net

I have acquired a Coparr Panzer tractor and would like some information about it.  Is there a website for this equipment or places to buy and sell parts for it?  I can be reached at the corporate address jsjfil@frontiernet.net as shown but would apreciate replies to my personal e-mail address at jwcrane@juno.com  Thank you. (James Crane)

Vintage steam engine wanted.  I am looking for any steam engine that may be for sale , any information would be helpful.  Thank you. Illenahqui@aol.com (Illenahqui)

Oil cooler to fit White/Iseki field boss 245 diesel.  E-Mail me at: t1wolfe@webtv.net

1946 Silver King, Model 42.  New rings, seals, tires are 75% and slightly checked (Only 8700 Silver Kings made..all models!!!)  Asking $2500 or may trade for other antique tractor orphans and oddballs of equal value.  E-Mail to: rothhaar@bright.net

1949 powerking tractor, 4ft sickle mower, belly cultivator, flat belt pulley, single plow, 24" rear tires. Runs well but needs restored.  Route 1, Box 104, Proctor WV 26055.  Phone (304) 455-1880 or E-Mail to: dme@ovis.net

I am looking for decals for an Avery tractor, can anyone give info as where to buy them.  E-mail to: mmhutchins@locl.net  Thanks

Looking for Shepard Diesel tractor parts engine.  2 or 3 cyl.  Engine block or whole parts engine. Bill Tremel, 111 Church Rd, Eighty Four PA 15330.  Phone (724) 228-3185 or E-Mail to: tremel@telerama.com

Advance Steam Engine--10 hp. Or other small steam traction engine. Any restorable condition. Possible trade for gas engines, tractors, or guns. Larry Barson, 4900 Clinton Rd, Jackson MI 49201.  Phone (517) 789-6926, Fax (517) 750-4441, or E-Mail me at: ljbarson@dmci.net

A friend of mine is looking for a front axle for a tractor model 30K row crop. Is there anybody capable to tell me how and where he can find out this kind of equipment. Living in France it will be easier if the adress is european.  Thanks to everybody abling to help us. Kinds regards.  gautheya@aol.comFor Sale: (4/1/98)

Have 10+ tracors waiting to be restored by someone who can.  All parts there but needs lots of love and time.  If interested in what type and info, E-Mail soon....going fast.  Also old hand tools and parts for M151 engines or hold motor parts for tractors.  Also old disk, plow, etc.  helstrom41@email.msn.com (Bobby D Wilson)

Just bought a Gibson stick drive... would like to known how to fine the year of tractor and manual.  The ID plate is gone.  Also looking for fly wheel for Gibson Boza 35/8x4 model AHH any help would be appreciated.  Mike Fayard, 486 Aeneas Valley Rd, Tonasket WA 98855-9504.  Phone (509) 486-2850 or E-Mail to smokedog@televar.com

Gibson model "D" three speed transmission. Willing to buy parts tractor.  Please e-mail me with any information that would help me locate one. Bryan Noe, 3620 E Smith Rd, Bellingham WA 98226.  Phone (360) 592-5586 or E-Mail to: bnoe@az.com

1964 ED 40 in good shape, was used as a working tractor until recently as I sold my place.   $4000  obo.  Jim Ulsh, 608 Hewitt, Pueblo CO 81005.  Phone (719) 561-1773.

I'm looking for a mid size tractor w/bush hog. Prefer a diesel , gas o.k. Louisville or So. Ind. area.  Robert Dattilo, 11404 Taylorsville Rd, Louisville KY 40299.  Phone (502) 267-6169 or E-Mail to: rdatt@kih.net

British Leyland 154 diesel parts: tach/hour meter, leveling gear for three point, swinging draw bar. Ron Carroll, 12405 Old Church Rd, Nokesville VA 20181.  Phone (703) 368-7453 or E-Mail to: maytagtwin@aol.com

In need of Custom tractor parts or may consider complete tractor. Also want info on my Custom with straight eight. Charlie English, 11290 Kahre Ct, Evansville IN 47710.  Phone (812) 867-0771 or E-Mail to: EnglishExchange@webtv.net

I would like to find out any information I can on a Brockway Tractor 1949 Gas.  I would like to restore it, it runs beautifully. milldar@penn.com (Ralph Miller)

Starter and generator for a Gibson SD.  Willow Hollow Ln, Clarksville TN 37043 or E-Mail to: ftroop@midwest.net

1/2 scale steam tractor in restorable condition, will also consider an unfinished kit. Prefer Case 65, or similar ,must have all or most of the parts. Please E-mail details including asking price to Ken Sullivan at: keann@worldnet.att.net

450 LP head. E-Mail Joe Walter at: walter@warwick.net

2655 4wd need not run but should be complete or close. John Nedved, 41791 Cleveland Rd, Tyndall SD 57066-6010.  Phone (605) 589-3045 or E-Mail to: jwnauto@byelectric.com

1947 B.F. Avery Model A rear cover without PTO.  E-amil John Wirths at: johnwirths@socket.net

I am in search of Sears Suburban tractors from the 50's to the 70's, reasonably priced. Also   decals and a steering wheel for a Sears Suburban model# 917.60616, serial# 31605. lilleary@aol.com

1964 ED 40    good condition was used as a working tractor until recently, $4000 - Jim U;sh, 608 Hewitt, Pueblo CO 81005.  Phone (719) 561-1773.

12-20 Flour City parts wanted:  Schebler 1 1/2" updraft carb with a 1/2" Shebler water carb attached to it.  A DETROIT 2 cyl lubricator, Lipman gear oil pump, KW high tension mag.  I'm also looking for pictures of this tractor that may have been published in the CHILTON TRACTOR JOURNAL, issues that might prove interesting would be July through Dec 1917 or Jan-June 1918.  The tractor was only made in 1918.  I'd be happy to pay for clear copies. Bruce Flatmoe, 7286 Clay Ave E, Inver Grove Hts MN 55076.  Phone ( 612) 457-9080, Fax (612) 779-6242, or E-Mail me at: bflatmoe@aol.com

Tractor parts for a variety of makes and models. Contact me or visit my website for more information. 949 Horseblock Rd, Farmingville NY 11738.  Phone (516) 696-1061, Farax (516) 698-6323, or E-Mail me at: Master105@aol.com
Home Page URL  : http://members.aol.com/ssbtractor

Anybody out there know of or have any Gibson parts for 47 model D?  ceheater@aol.com

I'm still looking for information, parts, former dealers, brochures, and any attachments that will fit my TWISTER TRACTOR, the mower deck, snow blower, sickle bar, etc.  Has anyone heard of these?  E-mail me at lotters@ttlc.net

Sears tractor, farm tires, no engine, plow frame, $150.00 -  Jake Britt, 39 Beech Street, Newport NH 03773.  E-Mail to: pinky@suger-river.net

I have a 1946 ? Gibson garden tractor with stick steering.  I would  like info on this...Who & where made, & Value, etc.  Cecil Hogan, 309 NW 6th St, Mineral Wells TX 76067.  Phone (940) 325-1082 or E-Mail to: seac@txol.net

Wide front end tractor reasonably priced.  Need it for an agriculture project for my 2 children.  I will consider all  manfacturers. Free or reasonable.  E-Mail me at Allis@aol.com

 I'm looking for a 4T LP gas tractor.  Steve Brinkmann, 7219 Brinkmann Ln, Waterloo IL 62298.  Phone (618) 9397431 or E-Mail me at: steve@htc.net

A Gibson model EF with Wisconsin engine. Must be restorable. Please let me know location, condition, and price....preferably within 1200 miles of  NE Montana.  Dean Glover, 777 James Dr, Plentywood MT 59254.  Phone (406) 765-1824 or E-Mail to: dwglover@nemontel.net

I'm still looking for any information, advertisments, manuals, sales literature, on Twister tractor. These were made by Bruce Mfg. Co. of Bruce WI until 1972 or so. Any info., would be greatly appreciated.  lotters@ttlc.net (Keith and Lisa)

Yanmar 4wd 17 hp diesel tractor. Only 250 hours, 3 pto speeds, high & low ranges, cat #1 3 pt hitch, nice compact tractor ready for work. Comes with 48" rear mount tiller. $4500.00 - E-Mail W R Meighen at: meighen@sota-oh.com

David Bradley tractors, parts, manuals, implements! Terry Stacy, Route 1, Box 86-A, Ackerman MS 39735.

Looking for a B F Avery model "V" tractor.  Must be restorable.  Please let me know location, condition and price. Dean Glover, 777 James Dr, Plentywood MT 59254.  Phone (406) 765-1824 or E-Mail to: dwglover@nemontel.net

Wallis tractor parts. Late 1920's model 2030. Bearings, misc engine and transmission parts. gas tank etc.  Quentin Wilson, Alexandria IN 46001. Call (765) 724-2924.

Looking for information on J.D. Adams Motor Grader Model 201.  Looking for the operators manual, repair manual, parts manual and sources of parts.  The grader has an International model H motor and an International rear end. Mike Kelso, PO Box 68, Emblem WY 82422 or E-Mail to: gkelso@tctwest.net

Engine for a Model 44 Silver king.  Long Block preferred but short block OK.  Edward Tabor, 821 Dr Miller Rd, North East MD 21901-1323.  Phone (410) 398-5238, Fax (410) 398-0110, or E-Mail to: edward.tabor@dol.net

Parts, attachments, and information for David Bradley Tri Trac Tractor.  Scott Shelton, 13116 134th Ave KPN, Gig Harbor WA 98329.  Phone/Fax  (253) 857-8008 or E-Mail to: sshell@narrows.com

The white side shields that fit below the hood of a 240 Utility Tractor. They are aprrox. 5" X 47 3/4" in size. Ronnie Redd, 4th & Tennessee, Clarksville MO 63356.  Phone (573) 242-3936 or E-Mail me at: bfarrar@nemonet.com

Any tractors or related equipment or documents manufactured by American Farm Machinery Company of Minneapolis, MN.  Needs to be located in or near Missouri. Call Mark Bookout at (573) 265-7030 or E-Mail to: markb@umr.edu.

Looking for the color of a BF Avery model A. Sold by Sears and Roebuck. mattjm@bgnet.bgsu.edu (Matt Minnick)

Would like to find a SD1 Sheppard diesel garden tractor... will pay finders fee.Wendell Kelch, 3727 Starling Rd, Bethel OH 45106. Call me at (513) 734-2501 or E-Mail to: wkelch2501@aol.cm - Thanks, Wendell.

In need of a Wards (1948) manifold.....Any out there? I am visiting relatives at this E-mail address until 2/7/98: rlbadkins@email.msn.com - If responding after that date, please contact Harold Harrier at RR # 4, Box 147, Tangier IN 47952. Phone (765) 498-2829.

1918 Maxwell truck converted to farm tractor. Have title. Not runable, missing parts. Has gas tank, radiator, complete engine, transmission, rear axle. Hard rubber tires and wood spoke wheels. Steering wheel and have extra transmission, head, fan and rims. Can provide photos if seriously interested. Price negotiable. Route 12, Box 320-A, Morgantown WV 26505 or E-Mail to: hynson@aol.com

Heider 12-20 Tractor, $8,500 - Buice Family Tractors. E-Mail to: aggie2004@aol.com or call (254) 857-9838.

Starter for David Brown Cropmaster or any 6 or 12 volt starter for DB gas engine. Also anyone who has a DB parts tractor. Also looking for 22" wheels or rims for JD L. Ralph Bradley, PO Box 39, Wainfleet, Ontario, Canada L0S 1V0. Phone (905) 899-1661 or E-Mail to: brad@inter-pc.com

Looking for Manual on Deutz 5505. weldit2day@aol.com

Any Literature for a Gibson 'A' and 'D'. I would also like to know if anyone knows of any Web Pages that have to do with the Gibson Tractors. E-Mail Brad Davis at: utjazzrgr8@aol.com

Sheppard Diesel Tractors, Engines, Implements, and Parts. Contact Mark Strusz at The Sheppard Diesel Club: (219) 999-5920 - IN or (612) 923-4236 - MN.

I am looking for a repair/service manual for a 1979 "Syncro" 262 Leyland tractor. Any suggestions or potential contacts would be greatly appreciated. Thanks, Darren Cothren - dcothren@mindspring.com

David Bradley Tri-Trac Cowling Top and Back (Sears P/N 591PA205) in good shape, as well as any implements. Also looking for a NOS 7:50 X 16 rear tire for same. Should be close to Southcentral PA. Melvin McIntire, PO Box 44, 373 Arendtsville Rd, Biglerville PA 17307. Phone (717) 677-6025 or E-Mail me at: mcintirm@mail.cvn.net

Power King Parts and Accessories: Many used and new Economy/Powerking parts and accessories. Soon to be Rhode Islands newest Power King dealer. Kevin Cash, Phone (401) 568-6322 or E-Mail to: ride0357@ride.ri.net

Looking for exhaust and intake manifold and front wheel bearing cover for a 1928 Rock Island model F. rediron@rconnect.com (Bret Braaten)

Original Parts and Operators Manuals for a Hough Payloader Model H-90 4-wheel-drive. E-Mail Ron Melamed at: ron@mail.superlink.net

Help!!!!! I'm searching for information about Bradley walking tractors. I recently purchased two for use on our small vegetable farm. I'm interested in .....years manufactured?....... implements available?......original colors?.......original engine size..etc.etc.. Both of mine are different. One still has the hood and wooden handles, a plow and disks. The other has a plow and no hood. Both seem to plow great. The disks work fine too. Hooked an old spike tooth harrow behind the disks. Did a fantastic job. Thanks for any help. Scott Akers - werfarm@swbell.net

I have a Wagnor WA4 four wheel drive and I need some help on the History of the Wagnor tractor company. Shorty Dear, 1105 Eton, Perryton TX 79070. Phone (806) 435-3968 or E-Mail me at: usedears@ren.net

Looking for manuals and information for David Brown 'Cropmaster'. Also looking for 22" wheels for JD 'L' - Ralph Bradley, PO Box 39, Wainfleet, Ontario, Canada L0S 1V0. Phone (905) 899-1661 or E-Mail to: brad@inter-pc.com

Have a 1960 FIAT 411R (4 cyl. deisel) Looking for a parts source. (gaskets & rings). E-Mail Mike Willison at: willison@intranet.ca

KECK GONNERMAN crosshead pump castings for KGC steam traction engines. Castings are made from #30 cast iron. Includes brass check valve castings and machining diagrams. $250.00 FOB. Thomas Hart, 7188 Simpson Rd, Gentryville IN 47537. Phone (812) 567-4381.

I have a Wagnor WA4 tractor for sale asking $6500 obo. Also I would appreciate any history on Wagnor tractors. A model & serial number list would really help. Shorty Dear, 1105 Eton Street, Perryton TX 79070. Phone (806) 435-3968 or E-Mail to: usedears@ren.net

Looking for any information on Twister tractors made up to the early 70's. such as colors, decals, etc. Thanks. lotters@ttlc.net

Looking for manuals or information for David Brown Cropmaster. Ralph Bradley, PO Box 39, Wainfleet, Ontario, Canada L0S 1V0. Phone (905) 899-1661 or E-Mail to: brad@iaw.on.ca

I need a set of wheel weights for my 435D that has 28" power out rims. I'm not sure but I think the casting # is M3580T. Any info. on a set of these will be highly appreciated.Thanks!! Tim W Ritter, PO Box 852, Nashville IN 47448. Phone (812) 988-7421 or E-Mail to: farmboy7@worldnet.att.net

20-35 2 cyl. Avery Tractor with Round Rad. - Ed Dina, 330 Plattekill Rd, Marlboro NY 12542. Phone (914) 236-3751 or E-Mail me at: hartparr@aol.com

EMPIRE tractor, 1947, model 90, excellent condition. Best offer takes it. pvervaet@mb.sympatico.ca

Good used engine for David Brown 995. Douglas Thompson, Rock Island Rd, Gouverneur NY 13642. Phone (315) 287-0024.

I am in need of a pressed steel wheel center for my Moline Avery model R. Thanks. Jim Cresap, Prague OK 74864. Phone (405) 567-2611 or E-Mail me at: fesler@besa.com

Looking for information for David Brown Cropmaster - pictures, manuals or any general info. Ralph Bradley, PO Box 39, Wainfleet, Ontario, Canada L0S 1V0. Phone (905) 899-1661 or E-mail to: brad@iaw.on.ca

Looking for parts for the engine of a dragon 360. Steve Chandler, 340 South Highway 92, Dandridge TN 37725. Phone (423) 397-2495, Fax (423) 397-9590, or E-Mail to: cltractor@aol.com - Please contact with any information.

Looking for info on Sears Model 917-5155. Sears did not go back far enough for the info of this tractor. Like to restore with books or info of engine, color, etc. Bruce Bettencourt, 403 Eight Rod Way, Tiverton RI 02878. Phone (401) 624-4364 or E-Mail me at: panzertrac@aol.com

Looking for parts for a Muir-Hill 161 4wd agricultural tractor. If anyone in the U.K., Canada or Australia as well as the U.S.A. has one or could locate one please respond. E-Mail Don Hagstrom at: dhagstro@nejc.cc.co.us

Eagle 16-30 Parts Tractor, Need Rear Wheels, All Clutch Parts and Some Misc. parts. Ed Dina, 330 Plattekill Rd, Marlboro NY 12542. Phone (914) 236-3751 or E-Mail to: hartparr@aol.com

10-20 engine. Complete, running when removed from grader. Needs overhaul. Good mag, carb, water pump, fair manifold. Engine J30V 437DE SN stamped on block AA26607. $500. Recently rebuilt transmission, Fuller 5-A-33-SP. $150. 4 ea. 9.5x24R15 6ply rating tires, tractor lug tread, very good condition with tubes, $75 ea. 2 ea 6.50x20 8ply rating truck tires, excellent tread, good condition, $50 ea. Parting out Austin Western 66 road grader SN 4592. Buy complete with all above for $950 or will sell parts. Dan Glandt, 929 McGovern, Cheyenne WY 82001. Phone (307) 634-8473 or E-Mail me at: Glandt_BT@compuserve.com

Would like information on where to get age of a Drott (international T-349 crawler tractor) with backhoe and loader/dozer blade. Serial # A2120 and model #340K3. Please respond to veeder@pojonews.infi.net

Friday tractor. Must run or turn. Close to SW Mich. Prefer a runner. S Wulff, 1610 Friday Road, Coloma MI 49038 or E-Mail to: swulff@qtm.net

Earthmaster tractor nose emblem for a 49' Earthmaster. Oval in shape approx 4' wide x 2' high or a good picture of one. Also, an original manual and any info where you can obtain decals for a Earthmaster tractor. Happy to pay a fair price. Jock Hengst, PO Box 303, Hamilton NY 13346. Phone (315) 824-2462 or E-mail me at: chengst@dreamscape.com

Looking for belts for an Agricat Tractor. Any available information on this tractor would be great. Also looking for information on a small tractor called "Beetle", Model W2 used by the Forestry Department, possibly in the 1930's. There were no more than around 35 of these manufactured. fishon226@aol.com

Need wheel weights for Model 1520 New Holland diesel tractor with 11.2 x 24 rear wheels. Will consider other than O.E. weights with 11" hole spacing with approximately 22" diameter. RR # 1, Box 20C, Luthersburg PA 15848. Phone (814) 583-5518 or E-mail to: ferd@penn.com

Older tractor to restore close to Portland, Oregon - preferably a JD. Call (503) 678-1568.

I have a tractor that goes by the name of "The General" which was apparently made between 1930-1940. It was distributed by B.F. Avery and Sons. The tractor was made by Cleveland Tractor Company , Cleveland, Ohio. It has a 4-cylinder Hercules engine. I would appreciate any information that anyone might have. I would especially like to obtain an original service manual or pamphlet if possible. Thank you. Miriam Chipley - miriam.chipley@nashville.com

Looking for any information about a small trackloader I saw back in the sixties, it had some sort of cloth pads, it was call a Tracmaster, does anyone have any info on this, if you do e-mail me at dg1@scott.net

I would like any information about Page tractors. E-mail to Ed Allen at: beall@wpcd.com

Old Heston 1010 swather parts machine, new tires and good engine, just hate to see it sit around, Best Offer in North-Central Texas area. Call Mike Gamble at (972) 296-0209.

My father is looking for a 1st gear which needs to be replaced on his Leader Tractor does anyone have any information on where these parts can be obtained? mikefish@mindspring.com (Mike Fish)

I am looking for garden tools for my 1631 Speedex tractor... plows, cultivators, box blades, ect. Also any info on parts. Tom Henry, 7714 Fred Romero Rd, New Ibeeria LA 70560. Phone (318) 365-0934 or E-mail to: crawdad360@msn.com

Used exhaust/intake manifolds for old tractor engines of all kinds. Don Livingston, RR # 2, Box 181A, Austin MN 55912. Phone (507) 433-0073 or E-mail me at: manifold@smig.net

I am looking for some rear end parts for a Wards tractor. Thanks. Don Van Eaton, 1113 W Mill, Butler MO 64730. Phone (816) 679-4754 or E-mail me at: tazman460@hotmail.com

I looking for Cushman Tracksters or parts. Also I looking for a Kit Bulldozer I think the name of the company was "Strucks" they were 8 or 10 hp and sold in the sixties and seventies. E-mail Glenn Miller at: badman@tir.com

I'm looking for any information on a turn of the century tractor "G & H" - I think made in the Cleveland, Ohio area. Thanks for any information anyone can give me. Kenneth W. Thompson, Miller Center, P.O. Box 5106, Charlottesville, VA 22905 Phone (804) 924-7236 - FAX (804) 982-2739 - website http://www.virginia.edu/~miller or E-mail me at: kwt8b@virginia.edu

I would like information to find a General G.G. tractor. I want to buy one for my daughter who's nickname is GiGi. E-mail to Gary Pressley at: pgary@clemson.edu

Information: Have a chance to get 6 Friday tractors (mostly orchard work types) and could make two-three out of 'em. Would appreciate info on value and specs (for restoration). Nephew of Friday Tractor Co. is possibly selling. These really used to do the job for apple/peach/cherry folks out here in SW/MI. E-mail Steve Wulff at: swulff@qtm.net

I am looking for any information and/or repair manual on a 1931 AC United. I just bought one and don't really know what I've got! Call Mike Abraham at (810) 392-9944.

Old trip New Idea Horn loader. It is in great shape. Will probably fit any narrow front end tractor. $150 - Gerald Wertz, Danville PA 17821. Phone (717) 275-0917 r E-mail to: werger20@pct.edu

I'm looking for a water pump for a 54 Terratrac dozer model# GT-30 made by the American Tractor Corp. Can anybody help ? Actually I've very little info about the machine, if anyone has one or has info about them please contact me at Phreds@aol.com Thanks , Fred S.

I am looking for a Jet Star 3 or U302 utility tractor in good condition to use. If anyone knows of one in east central Indiana or west central Ohio, let me know. Thank you. Jim Weiler, Union City IN 47390 - E-mail to: sixty@expert.cc.purdue.edu

Two Waterloo Bronco tractors...Not many produced. 1 @ type 158, Model 100, S/N 516; 1 @ Type 158, Model 100, S/N 610. These are small farm tractors with 2 cylinder air cooled engines. One is frozen & one runs. Please call Dave Myers at (810) 727-4244 for more info.

LANZ BULLDOG repl. 45 HP, 10, 4 Ltr. engine, mudguards (front to back) totally restored, ask for pictures, good price with strong pound. Andreas Dautel, Neuenbergstr. 12, Brackenheim, Germany 74336. Phone 49 7135 960376 (Fax ++49 7135 960377) or E-mail to: dautel@stud.fh-heilbronn.de

B.F.Avery Model A parts, esp.sheet metal, air intake/air cleaner assembly, propeller shaft housing, and hydraulic system parts.(my tractor has hydraulic pump only). Will consider buying a whole parts tractor. Donald Thomas, 5709 Old Heady Rd, Jeffersontown KY 40299-5047. Phone (502) 267-6746 or E-mail me at: defarm@worldnet.att.net

Would like to know where I could get an intake manifold for an 806 gas , 301 CI, new or aftermarket. Also looking for rear end parts for a Wards tractor. Don Van Eaton, 1113 W Mill, Butler MO 64730. Phone (816) 679-4754 or E-mail me at: tazman460@hotmail.com

I'm looking for information on a Swish-err tractor.... It's made by Swisher Mower and Machine Co. Warensburg MO. Any info would be great...Thank you. Kevin Beitz
kbeitz@csrlink.net

David Bradley Garden Tractors. Looking for club or people interested in sharing info on these 2 wheel tractors. Would appreciate any help. e-mail gacunicorn@aol.com.

Looking for lights and accessories for mid 60's Farrarri center steer farm tractor. It is a four wheel drive powered by a two cyl. diesel. Need any info possible, am working blind here to repair it. Any help please!!! E-mail Geenee Tennant at: geeneet@ivic.net

I am looking for information about Jumbo Simpson Tractors . They were made in Azuza Calif. by Jumbo Steel Works from 1946 thru 1955 . Is there any site on the web ? Is there any tractors close around Oregon I could go look at ? I am also intrested in buying one . Any help would be great . Thanks Bert - rameys@mail.coos.or.us -- FAX # 1-541-271-4485

Looking for an axel for an early 1960,s Balmar four wheel drive backhoe. This machine is driven by a Ford 4000, but has the Balmar running gear. leslie@tir.com

I have a friend who recently obtained, via trade, a 1959 Porsche Model 308 Diesel farm tractor. He has had a hard time finding any parts, & would like, if possible, to find a manual & a source for parts. Any help would be appreciated. mumford@povn.com (The Mumford family).

1951 BF Avery V cultivating tractor, with Hercules ZXB3 engine, pto, new hydraulic pump and IH carburater. Governer needs work. Includes bush hog, snow blade, and cultivators. Beautiful small tractor,asking $1800. Western Massachusetts. Contact efratkin@sophia.smith.edu

Governer (with casing) for 1951 Avery V cultivating tractor, with Hercules engine model ZXB3, governer model 5387. This governor also drives the hydraulic pump. E-mail to Elliot Fratkin at: efratkin@sophia.smith.edu

Ford, Dodge or Chevy Truck Tractor or conversion-----20s or early 30s model. Many Thanks. E-mail Charles Carroll at: cabshop@itexas.net

I am looking for a manual with the parts breakdown for a Sears late 1960's Tractor Model# 917.25201 s/n 2920 Suburban 15. I would also like to know what year this tractor really is. Sears wasn't able to tell me. I am half way finished in the restoration process. Located in Northern Connecticut. larocsr@nu.com

Stainless steel emblems that say "Hi-Utility" under the 350 emblem for a 1958 350 Hi-Utility tractor. Could someone out there reproduce these for me? Also buy Farmall/McCormick Super series tractors. E-mail Tom Harp at: tharp@bright.net

Transmission for an HD6. Call John Koracich @ 219-853-0240 or 219-365-2615 or E-mail to: shamrock@cybzrn.com

Looking for 1948 Volvo Tractor parts. Can anyone help? Russ Hillstead - rhillste@main.slocs.k12.ca.us

I am looking for information on Centaur tractors. I have a friend that lives in Savanna,N.Y., and he would like to purchase an owners/parts manual for this tractor. As far as we can figure, Centaur was in business from about the early 1920's to about 1945. Any help or information would be greatley appreciated. E-mail Kevin Kelly at: krk@relex.com

FMC sweet corn picker.$6800.00 - Paul Rauch, 1941 Riggs Rd NE, Newark OH 43055. Phone (614) 366-5477 or E-mail me at: hurart@infinet.com

I am looking for information on a Deutz D13006. I would like to buy a manual. Josh Strahan, PO Box 213, Batson TX 77519. Phone (409) 262-8314 or E-mail to: gina-josh@imsday.com

Information on an Indiana tractor, circa 1922 ...need color. Also would like to hear from other owners of Indiana tractors. Kenneth Vandewater, Box 1101, Blanco TX 78606. Phone (210) 833-5792 or E-mail to: kenneth@momenet.net

Looking for a 55-75hp diesel tractor, good condition,l ow hours for Kent or Essex county Ontario, Canada. RR # 1, Charing Cross, Ontario, Canada N0P 1G0. Phone (519) 351-8693 or E-mail to: dale@mnsi.net

Looking for a Deutz junkyard. I am looking for some used parts and shop manual or parts book on a 4006 tractor. E-mail Levi Corbin at: taztaz@tidalwave.net

For a 1934 Plymouth tractor (same as early Silver King) Tillotson M-23A carburetor for Hercules IXA engine; original air cleaner (Donaldson?), also need a source for a reproduction muffler. Dan Reeve, 667 Cherry Brook Road, North Canton CT 06059-1021. Phone (860) 693-1409 or E-mail me at: dreeve@snet.net

1939 Silver King Wide front R38, serial # 4115 crank start. Looks and runs good. $3000.00 - E-mail to: jpurdy@voyager.net

I have a Vaughn's Flex Tread tractor, water cooled, walk-behind, Serial No. 1400. How old is it? Also, looking for a factory air cleaner for it, and any other information anyone can give me about this tractor. E-mail to: troosen@aol.com

For Case David Brown 885 tractor - Complete engine. 6000 NE Breyman Orchard Rd, Dayton OR 97114. Phone (503) 864-3589 or E-mail to: ray@macnet.com

Any information as an original or reprint for service and adjustment of Pickering steam governer, thanks. E-mail to: steamman2@aol.com

Info in where I might be able to locate a used Staoh 650D or 650G tractor prefer to be in the Great Lakes region. tlc4too@aol.com

Is anyone hauling tractors from Florida to one of the big shows in Iowa this July? I need a 6000 lb tractor hauled form Florida to somewhere closer to my home in Nebraska. Call Richard Hain at (402) 643-2150

Gehl mini excavator. 10,000 lbs. Full cab. 46hp diesel. $18,000.00. Call Paul Rauch at (614) 366-5477.

I'm looking for a power steering pump and a mounting bracket to fit a David Brown 880 E. glenn.laidlaw@ns.sympatico.ca

DAVID BROWN 3800. I am in the process of rebuilding a DB 3800 and would like any history, parts and technical info. yadeb@juno.com

5 foot trayler style Rotary Mower and 5 to 8 foot Trailer Disc. 2005 Brunswick Ave N, Golden Valley MN 55422. Phone (612) 545-4406 or E-mail me at: zyck1@aol.com

Gehl GX45 mini excavator,10,000 lbs., 46hp diesel, full cab. $24,000.00. Take small dozer or backhoe on trade. Paul Rauch, 1941 Riggs Road NE, Newark OH 43055. Phone (614) 366-5477 or E-mail to: hurart@infinet.com

I need a service repair manual for a Bungartz T5 TilTrac Tractor; information on parts tractor and/or parts; and implements such as belly mower, side mower, blade, scraper blade, bush hog, etc. I would consider buying a complete tractor if reasonably priced. Respond to bakermunt@aol.com.

Would like to find a Maytag Tractor or any literature or pictures of one. soccer@webwide.net

Bowen with Hyd lift and grader blace, needs TLC, $500.00; Linclon Cassey, misc. parts, $100.00 - Ozzie Osgood, Phone (805) 482-3626 or E-mail to: osgood@iccas.com

Looking for Lincoln tractor information, parts, pictures,etc. I am trying to restore one...Help! osgood@iccas.com

1987 Gehl trackhoe, full cab, 46hp diesel, 9918 pounds, 24" bucket. $24,500.00. Might take four wheel drive vehicle on trade. Call Pall Rauch at (614) 366-5477

White 2-150. Roll-gaurd with canopy. New 20.8 x 38 rear tires. New engine. Fresh Paint. $10,000 - Greg Gordon, 7386 Aylsworth Road, Shreve OH 44691. Phone (330) 567-3774 or E-mail to: gordon.14@osu.edu

Need an operations or service manual for a Pennsylvania Panzer Model 1110R (year unknown). Actually, any info about Panzer tractors would be helpful. E-mail Tom Kinne at: keithalk@aol.com

Front hubcaps for early Silver-King wide front tractor and rear steel for CC Case. Phone (616) 549-2569

Cowl, implements, documentation, or information on Sears Handiman RT. E-mail Carl Fuller at: cfuller@norfolk.infi.net

1936 Avery with cultivators, $1500.00 - Donald Mack, 3734 S Lake Terrace, Homosassa FL 32646. Phone (353) 621-0318 or E-mail me at: dlm@montego.com

1928-1929 Avery treshing machine. 32" cylinder, machine belts included. Call Elliot Morris at (573) 221-8792.

Looking for any information on 1cylinder Gibson Tractors. E-mail me at: gizmo430@aol.com

I am in the process of restoring a Waterloo Manufacturing type 158, Model 100 tractor and need a shop and parts manual as well as a source of decals. If anyone can give me some information about this tractor or advice, I'd appreciate it. Mike Schwartz, RR 1 Box 226, Jeffersonville NY 12748. Phone (914) 482-3277 or E-mail me at: mschwartz@zelacom.com

Ring gear or complete transaxle for bushhog tractor model D410. Call Charles DeBartolo at (401) 377-6036

Interested in finding parts source for Deutz tractor, 1967 D4005. I need hood parts to complete restoring the tractor. gfrost-galax@worldnet.att.net (Gregory Frost).

Restoring a 1940 General, Model GG tractor. I need some misc. parts, manuals, advice, paint codes, etc. Can anyone help. Also need a carb for a Case SC or parts of. Also, I am looking for info on JD power blocks. What is the difference? Also interested in buying restorable tractors...what have you? Steve Kaufman, 1687 Poseyville Road, Midland MI 48640. Phone (517) 832-0670 or E-mail me at: scott.haufman@eng.clemson.edu

Tail lights for a 1981 David Bradley or Case 885. 30-18 Hokanson Rd, Elma WA 98541. Phone (360) 482-3687 or E-mail to: ronsc@techline.com

I am looking for an older tractor, need PTO and hydraulic lift on 3 pt hitch. Call David Clymore at (903) 533-1133.

Any inexpensive tractor with 3 pt hitch that runs. Prefer diesel. Also interested in attachments for farm or industry. Call Kerry Ware at (510) 938-5772

Gibson tractor parts & literature. Also, memberships in The Gibson Tractor Club are avaliable through me. Dave Baas, 4200 Winwood Ct, Floyd Knobs IN 47119. Phone (812) 923-5822 or E-mail me at: dbaas44290@aol.com

Keck-Gonnerman Indiana Special Thresher, for restoration or parts. Best offer. E-mail Ray Gansz at: raygansz@ezl.com

Front frame casting for 4506 Deuitz without weight bracket. William Jones, PO Box 1565, Waldron AR 72958. E-mail to: mcchamp@iso.com

Need a grill for a 1939 General tractor. Thanks for any help. E-mail Dave Bremer at: dbremer@mr.net

Porsche Super 3 cylinder diesel, wide front, 3 pt. hitch, $6500.00 - Paul Rauch, 1941 Riggs Road, Newark OH 43055. Phone (614) 366-5477 or E-mail to: hurart@infinet.com

1961 Lanz, wide front, 3 pt., 2 cyl diesel, $6500.00. Paul Rauch, 1941 Riggs Road, Newark OH 43055. Phone (614) 366-5477 or E-mail me at: hurart@infinet.com

Smokestack for 16 horse Advance, also tank heads for 22 Advance. Need wheels for 6 HP Advance. Byron Leathermon, 1824 S 1066 W. Lexington IN 47138. Phone (812) 866-4515 or E-mail to: bleather@seidata.com

I own a 1918 Samson Model M tractor made by General Motors until 1922. Need the manual or any data to help me restore this big steel wheel tractor. Fax (281) 838-1104 or leave message. E-mail to: linbar@hal-pc.org - Charles Culp in Baytown, Texas.

Looking for power steering cylinder for 1965 Nuffield 460 or any information on how to repair existing unit. Thank you, Doug. pcwright@pop.ghbbs.com

Have Gibson tractor rebuilt and ready for paint. Have pictures, will send. Contact Jim Osgood at: osgood@iccas.com

I would like to get some information on Silver King antique tractors. E-mail at: dbader1@aol.com

Built-up Rumely Oil Pull, 6 HP Fairbanks, F-12 rear end, 10-20 front end, JD-B clutch, smoker, rubber all around, excellent condition, looks and sounds like the real thing, roof over all. $3500.00 - Ken Bohn (616) 945-2527 or E-mail me at: organrgm@iserv.net

Gibson tractor, seems to be complete, has 24" rear wheels, needs total restoration, has snow blade (front) still attached, stick steering. Need the space - Sell to best offer or trade for old outboards, motorcycles, or parts. Ron Ellis, 9419 Cyclone Lane, Lee Summit MO 64064. Phone/Fax (816) 525-3875

Model E 30-60 Rumely. Also 24-40 Case, 25-50 Avery, or other. Ed Dina, 330 Plattekill Road, Marlboro NY 12542. Phone (914) 236-3751 or E-mail me at: hartparr@aol.com

To trade: I need a 3 or 4 plow tractor, 3 point, prefer diesel. Hope Oliver any year but any brand will do. Could have some implements. I have in trade a '53 cub, 5000 watt kub. gen., old tandem trailer good for farm, rifles and a shotgun. I need it for a large garden. My Dad is 80 and we do it as a team. PS - Needs to be fairly close to MD. bernie@chesapeake.net

Parts for Porsche tractor models AP11, AP12, AP17, AP22, AP33. Heating plugs Bergu gen 318 or Bosch KE/GA/s/s. Pistons, rings, injection pump Botch PF1A60, BS85/2. Cooling system, spring for blower fan for AP22. Starter Baotch EJO 1, 8/12 L33. Generator Botch REE 75/12-2000RI. Temperature guage, Oil pressure guage. Timing gears for AP11 and AP17. Head lights Hella, 00.31412.04 SK4/5. Valves rubber rings MGVS120.03 E-mail me at: roadster@iol.ie

Keck Gonnerman parts, pieces parts, photos, literaturea, anything relating to the KGC line. I am no expert on KGC but do have some resources available to assist any enthusiast. Thomas Hart, Route 1 Box 81, Gentryville IN 47537. Phone (812) 567-4381

Keck Gonnerman crosshead pump castings. Made from #30 cast iron. Includes barrel #56 1/2G, air chamber #42D, upper and lower chambers, brass check valve castings and machining diagrams. $250.00 - Thomas Hart, Route 1 Box 81, Gentryville IN 47537. Phone (812) 567-4381

Looking for a Wetmore Tractor (parts or complete) made about 1920 in Sioux City, Iowa. Very interested, family connections to the original manufacturers. Craig Smith, 194 Bedford Avenue, Castle Rock CO. Phone (303) 688-7535 or E-mail me at: syker@aol.com

We buy, sell, trade, locate, and broker antique tractors, loader tractors, orchard tractors, and forklifits/hi-lo's. We need orchard tractors and outdoor forklifts. Database of parts, projects, and complete units. Call 1-800-418-6494 or write to 10212 SW Greenville Rd, Greenville MI 48838. E-mail: elmcrest@iserv.net

Porsche farm tractor, three cylinder diesel, front, rear, and middle PTO, wide front, three point hitch. $9500.00 Probably made in the late 1950's. Trade for later model tractor. E-mail me at: hurart@infinet.com

Looking for intake and exhaust manifolds, also need side curtains for hood - Oliver 99 4 cyl gas Ser# 517249 - C66 Plant Z, South Bend IN. tdowis@hpdc.com

Engine and parts for Oliver Super 55. Would prefer source in Eastern Canada. Just want to get it up and running! Call 506-657-5782 or e-mail: gdklly@nbnet.nb.ca

Case, Deere, Moline, McCormick-Deering, Farmall Regular, & Whittie Diesel. Call (719) 942-3030 - Bill